By-alarm - Activator 1M Metal - 19478.M

Pdf
19478.M

Arké Metal / Systems / By-alarm

By-alarm - Activator 1M Metal
By-alarm connector/splitter, 4 LEDs for system control and management, 1 LED for location in the dark, Metal

Product Status
3 - Active

You may also be interested in

Class group
Alarm installations, emergency call and signalling
Class
Switchgear for intrusion detection system
Engaging electronically
Yes
Engaging mechanical
No
Engaging biometrical
No
Engaging indication
Yes
Radio system
No
Degree of protection (IP)
IP40
VdS class
None
Height
4.900 mm
Minimum order quantity: 1 NR

Barcode

Barcode Qty 1 NR
8007352597556
1 NR
5.1x4.3x5.3 [cm]
34.8 [g]
Barcode Qty 5 NR
8007352597563
5 NR
14.4x11.6x6 [cm]
224.4 [g]
Barcode Qty 60 NR
8007352647503
60 NR
36.5x33x13.5 [cm]
3,108 [g]
Question: Can I associate a connector art.20478/19478/14478 to different areas?
Answer: Yes. With this configuration it is not possible to manage INT, PAR activations. The connector will only set ON and deactivate the areas for which it is enabled.
Question: The connector art.20478/19478/14478 continues to trigger a “tamper” alarm on the system.
Answer: If enabled, check that the mechanical contact, positioned at the rear of the product (inside the box), is correctly closed. If the mechanical tamper is not used, disable the function using the “Connectors programming” procedure indicated in the product instruction sheet.

Didn't find the answer you were looking for?

Ask a question

Share

Codice QR scheda articolo

Legal

Vimar reserves the right to change at any time and without notice the characteristics of the products reported. Installation should be carried out by qualified staff in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed. For the terms of use of the information on the product info sheet see Conditions of Use.