Tab h-o-h interphone w/handset, black - 7509/D04

Pdf

7509/D04
ELVOX Door entry system / 2F/2F+ video door entry system / Audio / Audio indoor stations

Tab h-o-h interphone w/handset, black
Surface mounting Tab interphone for Due Fili system with handset, loudspeaker for electronic calls, capacitive keypad for interphone functions and intercom calls, facility for hard of hearing function, screws for fixing in round or rectangular mounting box, black

Product Status
2 - Will be discontinued

Class group
Communication technique
Class
Intercom
Installation technique
Bus system
Mounting method
Wall-/desk type model

00. CE Marking - EU

37. Marking - Morocco

Minimum order quantity: 1 NR

Barcode

Barcode Qty 1 NR
8013406227003
1 NR
22.5x21.7x8.4 [cm]
646 [g]
Barcode Qty 8 NR
8013406229663
8 NR
60x37.5x27 [cm]
5,168 [g]
Barcode Qty 10 NR
8013406305268
10 NR
28x24.5x21 [cm]
6,460 [g]
Question: How do you encode door entry units art. 7509 - Tab series - setting the primary and secondary identifier?
Answer: Encoding the main ID code: 1_ Lift the handset and press the Bell and Self-start buttons, holding them down until the Bell button starts to flash. 2_ Release the buttons. 3_ Within 5 seconds from release, press the Lock button and hold down until a warning beep is given from the indoor station, and communication between this and the external electronic unit has been established. 4_ Release the Lock button. 5_ Press the button (which?) or type in the code you wish to assign into the entrance panel.  Encoding the secondary ID code: Lift the handset and press the Bell and Self-start buttons, holding them down until the Bell button starts to flash. 2_ Release the buttons. 3_ Within 5 seconds from release, press the Lock and Self-start buttons and hold down until a warning beep is given from the indoor station, and communication between this and the external electronic unit has been established. 4_ Release the Lock and Self-start buttons. 5_ Press the button (which?) or type in the code you wish to assign into the entrance panel.

Didn't find the answer you were looking for?

Ask a question

Share

Codice QR scheda articolo

Legal

Vimar reserves the right to change at any time and without notice the characteristics of the products reported. Installation should be carried out by qualified staff in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed. For the terms of use of the information on the product info sheet see Conditions of Use.