Telephones art. 3562 - 3597: How are the dedicated keys (key, lamp, square) programmed?

For telephone 3562:

The keys with the key, lamp and square symbols already have the codes for interphone controls memorised. Different codes can be memorised by keying in the following programming string on the telephone 3562.

P, ME, 1,2,3, n° tel. P

Where:

P = the telephone key with arrow and rhombus symbol (indicates the entrance being programmed).

ME = the button located inside the telephone on the printed circuit (it must be pressed to memorise the codes).

1,2,3 = the direct memories M1, M2, M3 (key, lamp, square).

tel. no. = the new code to be memorised

On telephone 3562 it is possible to enable or disable the interphone control function on the dedicated keys. The programming string is the following:

P, *, x, P

Where:

X = 1 enables the interphone control dedicated key service.

X = 2 disables the service, the keys become direct memories allowing various numbers to be memorised for controls.

P = the telephone key with arrow and rhombus symbol (indicates the entrance being programmed).

Reset is performed by keying the following codes in sequence into telephone 3562:

P, R, 000.

 

_________________

For telephone art. 3597:

The keys with the key, lamp and square symbols already have the codes for interphone controls memorised. Different codes can be memorised by keying in the following programming string on the telephone 3597:

(arrow with rhombus), M1 (key), R2, R, 1, R, (arrow with rhombus).

(arrow with rhombus), M2 (lamp), R2, R, 2, R, (arrow with rhombus).

(arrow with rhombus), M3 (square), R2, R, 3, R, (arrow with rhombus).

The settings must be programmed after inserting the battery provided in the appropriate housing.

Reset is performed by keying the following codes in sequence into telephone 3597:

(arrow with rhombus), R, 0, (arrow with rhombus).

BCA ANALOGUE TELEPHONES WHICH DO NOT HAVE DEDICATED KEYS FOR INTERPHONE FUNCTIONS CAN STILL BE USED. THESE FUNCTIONS CAN BE OBTAINED BY PRESSING IN SEQUENCE ON THE TELEPHONE THE KEYS 1 R FOR THE "KEY" COMMAND, 2 R FOR THE "LAMP" COMMAND, 3 R FOR THE "SQUARE" COMMAND.