Connected NFC/RFID switch greyCode 20467
- 20467
- Wiring devices / View Wireless wiring devices / EIKON / Devices
- Connected NFC/RFID switch grey
- NFC/RFID smart card reader pocket for installation inside the room, IoT technology on Bluetooth technology 5.0 standard for the creation of View Wireless mesh system, 1 relay output NO 16 A 100-240 V~ 50/60 Hz, 1 configurable input, LED visible in darkness with brightness control, 100-240 V~ 50/60 Hz power supply, grey - 2 modules.
- Product Status
- 3 - Active
You may also be interested in
Sheets, Manuals, Documentation
- Full Multilanguage instructions sheet (1862 kb)
- Light multilanguage instructions sheet (1802 kb)
- Manuale app View Wireless (19693 kb)
- Manuel appli View Wireless (43543 kb)
- Manual app View Wireless (43542 kb)
- Manual View Wireless app (42589 kb)
- Εγχειρίδιο τεχνικού εγκατάστασης (43825 kb)
- Installationsanleitung View Wireless (43598 kb)
Drawings
Class group
Alarm installations, emergency call and signalling
Alarm installations, emergency call and signalling
Class
Access control system component
Access control system component
Model
Reader
Reader
Standalone
Yes
Yes
Networkable
No
No
PC-binding
No
No
Type of interface
Other
Other
Max. number of users
200
200
Type of reading technique
Code
Code
Signalling
Light signal
Light signal
Mounting method
Flush-mounted
Flush-mounted
Operating voltage AC 50 Hz
120,00 - 230,00 V
120,00 - 230,00 V
Operating voltage AC 60 Hz
120,00 - 230,00 V
120,00 - 230,00 V
Power over Ethernet (PoE)
Other
Other
Operating temperature
0 - 40 °C
0 - 40 °C
Degree of protection (IP)
IP20
IP20
Colour
Grey
Grey
Material
Plastic
Plastic
Width
67,30 mm
67,30 mm
Height
49,00 mm
49,00 mm
Depth
50,00 mm
50,00 mm
37. Marking - Morocco
40. Bluetooth technology
92. RoHS UAE
Minimum order quantity: 1 NR
Barcode
8007352661714
1 NR
5.7x5.3x7.7 [cm]
84.8 [g]
8007352663688
5 NR
21.4x11.6x6 [cm]
477.8 [g]
Share
Legal
Vimar reserves the right to change at any time and without notice the characteristics of the products reported. Installation should be carried out by qualified staff in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed. For the terms of use of the information on the product info sheet see Condizioni di utilizzo.