View Wireless App Guide

The View Wireless App allows you to configure connected wiring series devices, which are the ideal solution if you want to use smart functions to control lights, roller shutters, temperature and energy, loads and detect presence. Some devices can operate in standalone mode without gateway: this is the case of access and thermostat control devices. Check limits and available functions in each product manual. You can also enable the supervision of a connected system from a video entryphone Tab 5S Up art. 40515 or Tab 7S Up art. 40517 and configure the external entrance panel Due Fili Plus art. 40170.

The devices are preconfigured with the Bluetooth® technology 5.0 standard but can also work exclusively with the Zigbee technology standard by simply modifying the operating standard with a firmware update with the View Wireless App. Zigbee technology requires a third-party Zigbee gateway (for example, Alexia) and can be configured through the relevant app.

The Bluetooth® technology standard is designed to use devices in a mesh network, in which the gateway art. 30807-20597-19597-16497-14597 allows the user to control the system from the View app both locally and remotely and to control the system with voice assistants. On the other hand, with the View Wireless App you will be able to configure a Bluetooth technology system and set all device parameters.

2.4 GHz Wi-Fi connectivity is required to allow connection to the Cloud for supervision (locally and remotely) and for integrations with the Alexa, Google Assistant and Siri and Homekit voice assistants.

You can find the View Wireless App complete manual on https://www.vimar.com/it/it/catalog/product/index/code/30807.B

REQUIREMENTS TO USE THE APP

• Tablet and Smartphone
• GPS for geopositioning (required)
• Android operating system ver. 7.0 and later or iOS operating system ver. 12 and later

SYSTEM RESTRICTIONS

• Number of devices per system: max. 64
• Number of battery-free controls (art. 03925) that can be associated to each powered device: max. 2
• Number of 4-output actuators art. 03985: max. 8
• Number of scenarios per system: max. 16
• Number of groups: max. 32
• Number of actuators per group: max. 16
• Number of controls per group: max. 16
• Number of groups to which the same actuator can belong (except presence groups): max. 4
• Number of presence groups to which the same radar detector can belong: max. 1
• Number of remote relay groups to which the same radar detector can belong: max. 1
• Number of remote relay groups to which the same relay can belong: max. 1
• Number of groups to which the same control can belong: max. 1

N.B. When used as repeaters (max. 10), controls 30801.x - xx591 and module 03981 must not be counted in the maximum number of devices per system.

Up to 10 TAB 5S/7S UP video entryphone indoor stations can be associated in each View Wireless system for use of the functions envisaged by the integration. Furthermore, in addition to the maximum number of TAB S UP indoor stations (max. 10), you can use mobile devices (tablets and smartphones), smart speakers and IFTTT integration provided the maximum limit of 10 “connections” is observed. Each “connection” can consist of:

• a View user, utilised on smartphone or tablet (for instance, MyVimar user “Marco.Rossi@email.com” who uses the View App both on a smartphone and a tablet, counts as 2 total connections, just like MyVimar user “Marco.Rossi@email.com” on a smartphone and “Giulia.Verdi@email.com on a tablet count as 2 total connections)
• a user associated with smart speakers (for instance, MyVimar user Marco.Rossi@email.com with account linking to 10 smart speakers counts as just 1 total connection, whereas MyVimar user “Marco.Rossi@email.com” with account linking to 10 smart speakers and “Giulia.Verdi@email.com” with account linking to 10 smart speakers count as 2 total connections)
• a user associated with IFTTT (for instance, MyVimar user Marco.Rossi@email.com with account linking to IFTTT counts as just 1 total connection, whereas MyVimar user “Marco.Rossi@email.com” with account linking to IFTTT and Giulia.Verdi@email.com” with account linking to IFTTT count as 2 total connections)

TYPES OF USERS

The View Wireless App can be used by two types of users: Installer and Administrator (previously registered on MyVIMAR); each system can have only one Installer and one Administrator.

• The Installer creates the system, configures the devices, manages roles (invites the Administrator if not present) and carries out any required maintenance
• The Administrator can use the app to edit Wi-Fi credentials, update the gateway firmware, and transfer their Administrator credentials (after doing so they will be removed from the system)

The table shows the Installer and the Administrator’s duties.

CREATING A SYSTEM AND ITS ENVIRONMENTS (INSTALLER only)

Once you register and log on to MyVimar, you will see the app’s Welcome screen.

1. Select "Create new system" and enter the name you want to assign to the system
2. Select "Add" and enter the name you want to assign to the environment
3. If your system requires it, select “Add sub-environment” and enter the name you want to assign to the sub-environment within the environment you just created

Repeat these steps for all environments (and any sub-environments) you wish to create.

ENROLLING DEVICES (INSTALLER only)

After creating the environments enrol all devices; the gateway must always be enrolled at the end because it needs to receive all the programming data entered in the devices.

1. On the "Environments" screen select the arrow in the top right corner to view the "Devices" screen
2. Select "Add", choose the environment in which you want to include the device and assign a name to the device
3. Select the arrow in the top right corner of the screen to confirm
4. Activate the Bluetooth connection, approach the device you want to enrol and press its button or bush button (for roller shutters you must press both)
5. Once the device is enrolled, select the function and set all the relevant parameters

N.B. Different functions will be available depending on the type of device.

CREATING GROUPS (INSTALLER only)

1. Go to the Home screen to view the list of all systems and select the one you want
2. Select "Groups" / "Add", choose the environment in which you want to include the group and assign a name to the group
3. Choose the group function among "Lights", "Various", "Accesses and Presences", "Curtains and Roller Shutters", "Climate Control" and "Energy"; you will see the options relevant to your choice. The group will be displayed in the app as a single object and classified according to these settings

CHANGING SOME OF THE MOST IMPORTANT PARAMETERS (INSTALLER only)

Go to the Home screen to view the list of all systems and select the one you want. LED Colour

1. Select "Devices" and choose the one for which you wish to change the LED colour
2. Select "Edit" / "LED Backlighting"
3. Choose the type of colour by touching the relevant icon and use the cursor to adjust the level of brightness with function enabled (load ON) or disabled (load OFF)

Roller shutters opening and closing time

The time it takes the roller shutters to open and close is used by the device to know the open % position; therefore, for better supervision and control accuracy, the rise and close times must be specified correctly.

1. Select "Devices" and choose the "Curtains and Roller Shutters" for which you wish to configure/edit the opening and closing time
2. Select "Edit" / "Functions" and set the time for each parameter shown
3. Confirm with ✓

Relay Operation (two-position or one-position stable timed)

1. Select "Devices" and choose among "Lights" or "Various" or "Accesses and Presences" or "Climate Control" or "Energy" the one for which you wish to change the relay
2. Select "Edit" / "Functions" and set each parameter shown ("On/Off" or "Timed On" for one-position or two-position stable, relay type "NO" or "NC", etc.)
3. Then confirm with ✓

SYSTEM OPERATIONS (INSTALLER and ADMINISTRATOR)

Go to the Home screen to view the list of all systems and select the one you want. Gateway Select "Gateway"

• If you modify the system configuration select "Synchronise System” to save the new settings in the gateway; synchronisation is required:

- the first time the system is configured
- if a new devices is added at a later stage
- if the gateway is reset or replaced

• Select "Edit Wi-Fi" to change the network (2.4 GHz only) to which the gateway will be connected (you must enter the new credentials)
• Select "Replace" if you have to replace the gateway (for example, if there is an issue with the existing device)
• Select "Update Firmware" to make sure the version currently installed is the latest available; if a new version is available, it can be updated (see section "Gateway Firmware Update")

N.B.: If you are the Administrator, you will see only the options "Edit Wi-Fi" and "Update Firmware".

Testing the System

Select "System Checks"; you will be able to carry out three different tests:

• "Devices Mesh Network" will activate the test to check that the wireless connection between the gateway and all devices is working properly
• "Battery-Free Controls" will activate the test to check that the wireless connection between the gateway and the flat controls art. 03925 is working properly
• "Cloud" will activate the test to check that the connection between the gateway and Vimar’s cloud through the system router is working properly

Roles Management

Select "Roles Management" to assign the system to the Administrator

• choose "Administrator" if you are the Installer as well as the Administrator
• choose "Transfer Management" to handover the system to another user and assign them the Administrator role

Climate control Select "Temperature control" and choose the thermostat you want to configure:

• select "Season" to choose between "Summer" (cooling) and "Winter" (heating)
• choose "On Mode" to set the thermostat mode ("Automatic", "Manual" and "Reduction") when it is switched on
• choose "Off Mode" to set the thermostat operating mode (" Protection", "Absence" and "Off") when it is switched off
• choose “Automatic Temperatures”, for the "Summer" and "Winter" seasons, to set the three temperature levels (in increasing order) T1, T2 and T3 which will be used in the time schedules
• choose "Other Temperatures", for the "Summer" and "Winter” seasons, to set the temperatures for the "Reduction", "Absence" and "Protection" modes
• choose "Programming", for the "Summer" and "Winter" seasons, to set the time schedule for each day of the week
• choose "Synchronize Time” to synchronise the time on the smartphone and the thermostat so that the time schedules are aligned

VIDEO ENTRYPHONE INTEGRATION (INSTALLER and ADMINISTRATOR)

Following suitable configuration by the Administrator, the View Wireless App is designed to manage the functions of a connected system from a video entryphone indoor station (Tab 5S Up art. 40515 and Tab 7S Up art. 40517).

N.B. Before starting the integration, make sure the gateway and the Tab S Up video entryphone are functioning correctly and are connected to the Vimar Cloud.

Associating the video entryphone

1. Go to the Home screen to view the list of all systems and select the one you want
2. Select "Integrations"
3. Select "Associate" and assign a name to the video entryphone
4. Select "Settings" / "Network and Devices" / "Configure VIEW WIRELESS Cloud Service" and scan the QR code on the video entryphone (the app automatically activates the camera on your smartphone/tablet). In dark settings, select the “torch” icon to activate the mobile device illumination and facilitate the QR code reading

Once the QR code has been scanned, the association is complete and the video entryphone will be displayed on the "Integrations" screen.

Associating the Roxie entrance panel (art. 40170)

1. On the "Environments" screen select the arrow in the top right corner to view the "Devices" screen
2. Select "Add", choose the environment in which to place the entrance panel and assign it a name
3. Select the arrow in the top right corner of the screen to confirm
4. With the Bluetooth connection enabled, approach the entrance panel and activate its configuration mode
5. Select the "pen" icon, set the access PIN, and confirm with ✓
6. Use the "up arrow" and "down arrow" to set the number of push buttons on the entrance panel and define the behaviour for the access function; confirm with ✓

N.B. With the entrance panel connected to the gateway you can manage the functions directly from the View app (open lock, lights control, etc.); however, if the entrance panel is on stand alone mode (not connected) the app managing and supervision functions will not be available.

UPDATING THE DEVICE FIRMWARE (INSTALLER and ADMINISTRATOR)

1. Go to the Home screen to view the list of all systems and select the menu icon in the top left
2. Select "Manage Device"
3. Activate the Bluetooth connection, approach the device and press the button or push button (for roller shutter devices, press both buttons) until the LED starts blinking.The app will check that the firmware version coincides with the version on the network; the update can be done only if a more recent version is available
4. Select "Update Firmware". The app downloads the firmware from the Vimar Cloud and uploads it on the device; once completed, the new updated version is shown.

UPDATING THE GATEWAY FIRMWARE (INSTALLER and ADMINISTRATOR)

1. Go to the Home screen to view the list of all systems and select "Gateway"
2. Select "Update Firmware"; the app will check that the firmware version coincides with the version on the Vimar Cloud; the update can be done only if a more recent version is available (a warning message will be shown on the top part of the screen)
3. Select "Update". The gateway LED will blink white until the firmware is uploaded and then will turn off; do not carry out any operation until the LED turns off
4. Once the LED is off, select "Close"; the gateway will operate with the new firmware installed

Ver. r565 - 16 October 2025

• Added the option to purchase the system’s operating statistics data
• Added scenario backup when replacing the system gateway

Ver. r538 - 14 July 2025

• Added support to device 02974 - IoT connected dial thermostat 2 modules
• Added support to device 03989 - IoT connected thermostatic head
• Added support for repeater mode on device 03981- IoT connected relay module
• Added support for remote climate control actuators (fan coil – valve – circulation pump)
• Added support for new functions to device 03980 - IoT connected battery-operated magnetic contact

Ver. r522 - 18 March 2025

• Added support to device 03983 - “SELV connected IoT module device 3in 1out”
• Added support to device 03985 - IoT connected multifunct. actuator 4out relay
• Added support to device 03986 - IoT connected multifunct. actuator 0/1-10V +relay
• Added support for repeater mode on device xx591 - IoT Connected Control

Ver. r483 - 15 October 2024

• Added routine support

Ver. r465 - 10 July 2024

• Enabled timed card management for Roxie entrance panel
• Safety updates

Ver. r452 - 7 May 2024

• Safety updates

Ver. r415 - 10 October 2023

• Added timed card management
• Added support for Roxie entrance panel

This section contains the main new features introduced by the updated App version releases.

View Wireless app for iOS and Android – ver. 1.16.4 – 16 October 2025

• Device updates introduced to enable data history, available in the View app with the two optional Premium subscriptions (Base and Full):

- Measured temperatures and setpoints, heating/cooling activations
- Energy consumed/produced, with improved granularity
- Battery level of wireless anti‑intrusion sensors
- Count of activations and active hours for lights and generic loads

View Wireless for iOS and Android mobile phones – ver. 1.16.0 - 14 July 2025

• Added mounting frame for dial thermostat (art. 02974/30811) and thermostatic head (art. 03989)
• Climate control boosting (groups, fan coils)
• New functions on existing products:

- 3-speed fan coil control on multifunct. actuator 4out relay (art. 03985)
- variable speed fan coil control on actuator 0/1-10Vdc + relay (art. 03986)
- climate control in the various zones via groups on dial thermostat (art. 02973/30810)
- mesh network repetition on relay module (art. 03981)

View Wireless for iOS and Android mobile phones – ver. 1.15.0 - 18 March 2025

• Introduced all functions for the configuration of 3in 1out Module (art. 03983), of Multifunction Actuator 4out (art. 03985) and Actuator 0/1-10Vdc (art. 03986)
• Introduced the possibility of extending the mesh cover of devices by configuring the connected control (xx591) as a repeater. In this configuration, other functions cannot be configured on the device

View Wireless for iOS and Android mobile phones – ver. 1.14.1 - 25 February 2025

• Updated RFID connected landing reader (art. 30812.x - xx462)

View Wireless for iOS and Android mobile phones – ver. 1.14.0 - 10 July 2024

• Introduced compatibility between Roxie outdoor station (art. 40170) and Vimar View Portal to gain access using the View Key app

View Wireless for iOS and Android mobile phones – ver. 1.13.3 - 14 May 2024

• Introduced graphic and detailed functional enhancements

View Wireless for iOS and Android mobile phones – ver. 1.13.2 - 4 March 2024

• Introduced graphic and detailed functional enhancements

View Wireless for iOS and Android mobile phones – ver. 1.13.1 - 12 February 2024

• Introduced all functions to configure Roxie outdoor station (art. 40170)
• Introduced the possibility for the end user to edit certain parameters of the ROXIE outdoor station (art. 40170)
• Introduced graphic and detailed functional enhancements