Catalogues and brochures
News & Press
Questions and answers on «By-me building automation system / Call-way»
To find answers to your questions, select the category or search directly in the search box
By-me home automation
By-me burglar alarm system
By-me home automation
By-me sound system
By-me Energy Management
Emergency lighting fittings
By-me building automation system
Netsafe: data transmission
Video door entry systems
Due Fili system
Open Bridge 69DM
Can I programme old and new MD modules on the software?
How can I recover the ADL EF IP address (article 02094)?
With software version 2.5, the speech synthesis is in English, how can I set it in Italian?
How can I set the COM communication port on the software version 2.2?
Does the Call-way software run on Microsoft Windows 10 platform?
Minimum PC characteristics:
Can I have multiple PCs in a single Call-way system?
If I use the system in ON-LINE mode, does the PC always have to be connected to the system?
What are the differences between the OFF-LINE and ON-LINE system modes?
Can the corridor display (article 02097.1) display advertising images?
Can I customise the corridor display (article 02097.1) with the ward names?
Can I place 2 or more room devices (NC contacts) in series on an MDV or MCS 8 input?
Are there any rules to comply with for the installation and programming of 8-channel MCS modules, article 02096?
Can I replace an MD with the new antibacterial MD?
What do I need to install the new warning light assembly (article 02084)?
Can I have a Call-way system without ADL EF (article 02094)?
Can I use an RS232/USB adapter to connect the 02091 protocol converter?
Download the technical library of Call-way
During the system self-recognition process, some modules are not seen by the program.
What support relay do I need to link light controls operated from a keypad?
What kind of cable should I use for the connection of the call buttons and door lights to the module?
Can I connect multiple call buttons in parallel on the same input on the module?
In an ON-LINE system, if a voice call to mobile, DECT or paging device is required, what devices will I need?
Is there a buzzer on the Display Modules that sounds when there is a call?
How many calls can be viewed on the DM?
If I install a system in ON-LINE mode, how many cables do I need?
If I install a system in OFF-LINE mode, how many cables do I need?
What kind of cable should I use for connecting to the display to the main BUS line?