By-alarm - Activator 1M Metal - 19478.M


Arké Metal / Systems / By-alarm

By-alarm - Activator 1M Metal
By-alarm connector/splitter, 4 LEDs for system control and management, 1 LED for location in the dark, Metal

Product Status
9 - Discontinued

Question: Can I associate a connector art.20478/19478/14478 to different areas?
Answer: Yes. With this configuration it is not possible to manage INT, PAR activations. The connector will only set ON and deactivate the areas for which it is enabled.
Question: The connector art.20478/19478/14478 continues to trigger a “tamper” alarm on the system.
Answer: If enabled, check that the mechanical contact, positioned at the rear of the product (inside the box), is correctly closed. If the mechanical tamper is not used, disable the function using the “Connectors programming” procedure indicated in the product instruction sheet.

Didn't find the answer you were looking for?

Ask a question


Codice QR scheda articolo


Vimar reserves the right to change at any time and without notice the characteristics of the products reported. Installation should be carried out by qualified staff in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed. For the terms of use of the information on the product info sheet see Conditions of Use.