14008.2
Wiring devices / Traditional wiring devices / PLANA / Devices
1P NO 10A push button 2M white
1P NO 10 A 250 V~ push button, lightable, replaceable button, white - 2 modules
Product Status
3 - Active
00. CE Marking - EU
13. SNI - Indonesia
14. TSE - Turkey
19. NOM - Mexico
29. QCERT - Colombia
31. TISI - Thailand
37. Marking - Morocco
| Question: | What is the minimum and maximum operating temperature? |
|---|---|
| Answer: | The specifications regarding the room operating temperatures valid for our electromechanical controls are as follows: - They must not exceed 40°C, considering also that an average of 35°C must not be exceeded in a 24-hour period. - They must not drop below -5°C. |
Didn't find the answer you were looking for?
Vimar reserves the right to change at any time and without notice the characteristics of the products reported. Installation should be carried out by qualified staff in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed. For the terms of use of the information on the product info sheet see Conditions of Use.
