16633.B
Wiring devices / Traditional wiring devices / IDEA / Devices
IR relay-switch 230V white
Automatic lighting switch with IR motion sensor, adjustable dusk/dawn sensor threshold and time-delay cycle, NO 6 A 230 V~ relay output, supply voltage 230 V~ 50-60 Hz, weiß
Product Status
3 - Active
00. CE Marking - EU
37. Marking - Morocco
37. Marking - Morocco
43. UKCA mark - Great Britain
| Question: | Where should I install the 16633 Idea and 14181 Plana switches with infrared presence detectors for switching on lights? |
|---|---|
| Answer: | Keep them away from heat sources and barriers like plants, furniture or columns; they should not be exposed to direct sunlight or have interior lights shining directly on them; they should be mounted 110 to 130cm above ground level if the installation is flush mounted. For higher installation, they must be installed on an adjustable supports. |
Didn't find the answer you were looking for?
Vimar reserves the right to change at any time and without notice the characteristics of the products reported. Installation should be carried out by qualified staff in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed. For the terms of use of the information on the product info sheet see Conditions of Use.
