30810.C
Wiring devices / View Wireless wiring devices / LINEA / Devices
IoT dial thermostat 2M canvas
Dial thermostat with relay output 5(2) A 240 V~, IoT technology on Bluetooth technology 5.0 standard for the creation of VIEW Wireless mesh system, 1 input for external temperature sensor, 100-240 V~ 50/60 Hz power supply, heating and air conditioning in ON/OFF and PID mode, class I temperature control device (contribution 1%) in ON/OFF mode, class IV (contribution 2%) in PID mode, white LED backlighting with brightness control, canvas - 2 modules
- It is compatible with voice assistants Alexa and Google Home through Skill and Action VIEW Product
- Maximum simplicity thanks to the large knob
- Configuration via “VIEW Wireless” App for Bluetooth technology system
- Hotkeys are designed for quick interaction
Product Status
3 - Active
You may also be interested in
Sheets, Manuals, Documentation
- Light multilanguage instructions sheet (1051 kb)
- Foglio istruzioni multilingua Full (697 kb)
- Feuille d’instructions multilangues Full (701 kb)
- Hoja de instrucciones multilingüe Full (698 kb)
- Full multilanguage instructions sheet (693 kb)
- Πολυγλωσσικό φύλλο οδηγιών Full (861 kb)
- Mehrsprachig-Gebrauchsinformation Full (700 kb)
- ورقة الإرشادات Full (830 kb)
- Manuale app View Wireless (19181 kb)
- Manual View Wireless app (40958 kb)
- Manual app View Wireless (40735 kb)
- Installationsanleitung View Wireless (40757 kb)
- Manuel appli View Wireless (40963 kb)
- Εγχειρίδιο τεχνικού εγκατάστασης (41171 kb)
Drawings
Stats, switches and controllers
Room thermostat
Other
230 V AC
3-/4-wire
No
0 - 40 °C
Yes
Parallel
PID
Yes
1
Yes
1
0,10 - 1,00 k
Yes
Yes
No
Resistance sensor
Flush-mounted
2
Yes
Turn
No
Normally open contact (NO)
230 V
5 A
IP20
Other
No
Beige
7032
52,80 mm
44,80 mm
41,70 mm
0 mm
IV
Yes
Yes
Yes
Yes
37. Marking - Morocco
40. Bluetooth technology
42. Zigbee certified
Barcode



Share
Legal
Vimar reserves the right to change at any time and without notice the characteristics of the products reported. Installation should be carried out by qualified staff in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed. For the terms of use of the information on the product info sheet see Conditions of Use.