Rondò plate 3M wood cherry - 16753.53

Pdf

16753.53
Wiring devices / Traditional wiring devices / IDEA / Cover plates

Rondò plate 3M wood cherry
3-module Rondò cover plate, solid wood, cherrywood

Product Status
2 - Will be discontinued

You may also be interested in

Class group
Domestic switching devices
Class
Cover frame for domestic switching devices
Number of units
3
Mounting direction
Horizontal and vertical
Number of units horizontal
3
Number of units vertical
1
Number of modules horizontal (module system)
3
Number of modules vertical (module system)
1
With mounting grid
Yes
Suitable for subfloor installation duct box
Yes
Suitable for wall duct
Yes
Suitable for built-in installation
Yes
Label space/information surface
Yes
Material
Wood
Material quality
Other
Halogen free
Yes
Surface protection
Untreated
Surface finishing
Matt
Colour
Wood
RAL-number (similar)
8003
Transparent
No
With hinged lid
No
Degree of protection (IP)
IP00
Type of fastening
Clamp mounting
Width
123,00 mm
Height
82,00 mm
Depth
9,00 mm
Built-in width
123,00 mm
Built-in height
82,00 mm
Diameter bore hole (opening)
0 mm

00. CE Marking - EU

Minimum order quantity: 1 NR

Barcode

Barcode Qty 1 NR
8007352104334
1 NR
12.5x8.5x1.1 [cm]
25.13 [g]
Barcode Qty 10 NR
8007352104341
10 NR
13.5x12.4x9.6 [cm]
312.93 [g]
Question: Are the Idea Rondo plaques compatible with the devices and mounting supports of the Idea Classic plaques?
Answer: The Idea series has devices and mounting supports that can be completed with both Classic plaques and Rondo plaques. The Rondo plaques are not compatible with the following parts (thus require Classic plaques):-16803 and 16806 table mounting box-16813 mounting bracket-09975.A surface mounting box-16570.SZ and 16570.SZ.B mounting support for infrared remote control.

Didn't find the answer you were looking for?

Ask a question

Share

Codice QR scheda articolo

Legal

Vimar reserves the right to change at any time and without notice the characteristics of the products reported. Installation should be carried out by qualified staff in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed. For the terms of use of the information on the product info sheet see Conditions of Use.